Brother HL-L2350DW WiFi Setup: Complete Wireless Connection Guide

Setting up the Brother HL-L2350DW WiFi connection can feel like a lot when you’re not sure where to start. Maybe you just bought the printer, or maybe you’ve recently changed your router and need to reconnect. Either way, this guide from Explore Tech Hive will walk you through the process step by step.

We’ve helped thousands of users solve printer setup headaches, and the Brother HL-L2350DW WiFi setup is one of the most commonly searched ones. Let’s make it easier—without the techy overwhelm.

What You’ll Need Before You Start

Before we dive into setup mode, gather a few essentials:

• Your Brother HL-L2350DW printer (powered on)
• Your WiFi network name (SSID) and password
• A computer or smartphone connected to the same WiFi
• A USB cable (if needed as a backup method)
• Access to your router (optional for WPS)

Once you’ve got those in place, you’re good to go.

Step-by-Step: Connect Brother HL-L2350DW to Wireless Network

Let’s break it down using the built-in wireless tools on the printer. This process works well for most setups, even if you’ve never touched a Brother printer before.

Step 1: Wake up the printer

Press any button to wake the printer from sleep mode. You’ll use the arrow buttons and the “OK” button to navigate.

Step 2: Navigate to Network Settings

On the printer’s control panel, go to:
Menu > Network > WLAN > Setup Wizard

The printer will start scanning for nearby wireless networks.

Step 3: Choose your WiFi network

Select your SSID (your home WiFi network name) from the list.

Step 4: Enter your WiFi password

Use the arrow and OK buttons to input your WiFi password. It takes a moment, but accuracy matters here.

Step 5: Confirm and Connect

Once entered, press OK to confirm. The printer will attempt to connect. If successful, it’ll say “Connected” and print a confirmation page.

These are the Brother HL-L2350DW wireless installation steps most users will follow successfully the first time.

No USB? No Problem: Setup Brother HL-L2350DW Printer Without USB

Some folks think a USB cable is required. It’s not. If your WiFi is stable and you follow the steps above, you can setup Brother HL-L2350DW printer without USB just fine.

However, if the printer fails to connect wirelessly or doesn’t appear during computer setup, a temporary USB connection can help finalize the process. You’ll plug it in, run the Brother setup software, configure WiFi, and unplug once the setup is done.

It’s a fallback option—not a necessity.

WPS Setup Option (For Compatible Routers)

If your router has a WPS button, there’s an even easier way to get connected.

Here’s what to do:

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the WiFi button on your printer.
3. Wait until the WiFi LED stops blinking and turns solid.

That’s it. No passwords, no screens—just wireless magic.

Not all routers support WPS, though. If yours doesn’t, use the regular Setup Wizard instead.

Can’t Find Your Printer on the Network?

Sometimes, the HL-L2350DW doesn’t show up on your PC or mobile device, even though it’s connected. If this happens:

• Check that your computer is on the same 2.4GHz WiFi network (not 5GHz)
• Disable any VPNs or firewalls temporarily
• Power cycle the printer and router

Still stuck? Visit our general Brother WiFi setup tutorial for more troubleshooting tips.

How to Reconnect After Changing Routers

If you’ve changed your WiFi name or password recently, the printer won’t connect automatically.

To fix this:

1. Press Menu > Network > Network Reset
2. Confirm and let the printer restart
3. Repeat the Setup Wizard process to connect to your new network

This quick reset usually solves 90% of post-router-change issues.

Checking Connection Status

To confirm that your printer is truly connected:

• Print a Network Configuration page (hold down the Go button for 10 seconds)
• Check for a valid IP address and “Connection OK” status
• Try printing a test page from your PC

This helps verify the setup without guesswork.

FAQ – Brother HL-L2350DW WiFi Setup

1. How do I connect a Brother HL‑L2350DW printer to a 2.4 GHz WiFi network?
   Go to Menu > Network > WLAN > Setup Wizard. Choose the 2.4GHz version of your SSID if your router offers both 2.4GHz and 5GHz. This model doesn’t support 5GHz.
2. What is the default WiFi password for Brother HL‑L2350DW setup?
   There isn’t one. You’ll need to enter your home WiFi password manually using the printer’s control panel during the setup wizard.
3. Can I use WPS with the Brother HL‑L2350DW model?
   Yes, if your router supports WPS. Press WPS on your router, then the WiFi button on the printer. It’ll connect without entering a password.
4. Why won’t my HL‑L2350DW show on my wireless network list?
   Make sure the printer is turned on and connected. Also ensure you’re using 2.4GHz WiFi, not 5GHz. Restarting the printer and router can help too.
5. How do I update WiFi settings on Brother HL‑L2350DW if I change routers?
   Use Menu > Network > Network Reset. Once reset, run the Setup Wizard again to connect to your new WiFi network.
6. Is an Ethernet adapter needed for HL‑L2350DW WiFi installation?
   No. This model has built-in WiFi and doesn’t require Ethernet for standard wireless setup.

Final Thoughts from Explore Tech Hive

Getting your Brother HL-L2350DW WiFi setup right isn’t as complicated as it might seem—especially once you break it down. Whether you’re using WPS, the control panel wizard, or even a temporary USB connection, it’s all doable with a little patience.

If things don’t work the first time, don’t worry. Reset the network settings and try again. It’s usually one small detail—wrong password, wrong network, or a skipped step—that gets in the way.

Still need help? Don’t forget to check out our general Brother WiFi setup tutorial for extra troubleshooting tricks and model-specific help. At Explore Tech Hive, we’re all about making wireless printing feel less like rocket science—and a lot more like plug and play.